Treoir Roghnaigh Bharda HPL: Tiús, Gearrthaí & Ullmhas

HPL Board Selection Guide: Thickness, Cut-Outs & Delivery

Andiwilson HPL Boards for Service Counters and Utility Surfaces

HPL boards are rigid decorative components used where a cleanable face and exposed edges are both required. Andiwilson reviews board thickness, core type, edge band and fixing method before production. An illustrative airport lounge used 12 mm boards for a service counter with cable ports; a laundry room used 10 mm boards for folding tables and sorting cabinets. Both briefs checked cut-out accuracy, joint alignment and wipe-down routine. Boards were labelled by zone for staged delivery. Suitability should be confirmed against the selected build-up and current technical data rather than assumed for every utility space.

Get A Quote

Case Study

Airport Lounge Service Counter with Cable Ports

An illustrative airport lounge project used 12 mm HPL boards for a service counter and back counter. Boards were cut with cable ports, till recesses and rounded corners from approved drawings, then edged with matching ABS and labelled by counter section. Installation took place over two night shifts to keep the lounge open. Staff agreed a neutral-detergent wipe routine and were asked to report chipped edges. One spare board was stored for future changes. The brief focused on cleanability, cable management and joint alignment, with performance checked against the chosen board grade.

Commercial Laundry Folding Tables and Sorting Cabinets

An illustrative commercial laundry used 10 mm HPL boards for folding tables and sorting cabinet tops. A light grey decor was chosen to show up lint and spills for prompt cleaning. Boards were cut with sink recesses and edge trims at trolley impact points. The contractor installed over a weekend to avoid disrupting hotel linen schedules. Staff received guidance on neutral detergent and avoiding wet pooling at joints. Two spare boards were retained for repairs. The brief addressed moisture exposure, edge protection and manageable replacement, with suitability confirmed against the selected grade and fixing detail.

Sports Centre Locker Backs and Changing Dividers

An illustrative sports centre used 10 mm HPL boards for locker backs and changing dividers. A dark blue decor was selected to hide scuffs in a busy changing area. Boards were cut with ventilation slots and fixing holes, then edged and packed by changing room. Installation was phased over three evenings. Cleaning staff agreed a daily wipe and prompt spill removal. Aluminium trims protected exposed corners at bench height. One spare board was kept for repairs. The brief prioritised durability-looking appearance, cleanability and replacement planning, with wear expectations limited to the selected grade and care notes.

HPL boards are rigid decorative components that combine a core with high pressure laminate faces, supplied cut to size and edged for installation. They differ from thin laminate sheets because the board provides its own strength and can be fixed with exposed edges. Andiwilson supports projects by reviewing board thickness, core type, edge band and fixing method before production. Illustrative specifications may use 12 mm boards for airport lounge counters and 10 mm boards for laundry folding tables or sports centre locker backs. Fabrication follows approved drawings for cable ports, sink recesses, ventilation slots and service openings. Boards can be edged with matching laminate, ABS or aluminium trims and labelled by zone or room for phased delivery. Packing in installation sequence helps contractors work in occupied buildings. Andiwilson provides care notes covering neutral-detergent wiping and edge inspection. Performance depends on the selected build-up and site conditions, so project teams should confirm current technical data and installation guidance before ordering. This practical approach helps designers and contractors use HPL boards without overstating moisture or impact resistance.

Frequently Asked Questions

What is an HPL board used for?

It is used for service counters, folding tables, locker backs, changing dividers and utility surfaces where a rigid, cleanable component is needed. The board combines a core with decorative faces and can be cut and edged before delivery. Andiwilson advises matching thickness and edge detail to the application.

How does an HPL board differ from a laminate sheet?

A board is a rigid component with a core, often 10–18 mm, while a sheet is a thin decorative surface bonded to a separate substrate. Boards can be fixed with exposed edges. Andiwilson advises confirming the format, fixing method and edge treatment before specification.

What thickness is common for HPL utility boards?

Utility boards often use 10–13 mm panels, but choice depends on span, support, fixings and expected handling. Folding tables may need thicker boards than locker backs. Andiwilson recommends reviewing drawings and current technical data before confirming the build-up.

Can HPL boards be used in laundry or changing areas?

Some laundry and changing areas can use HPL boards when joints, edges and fixings are detailed for moisture exposure and cleaning. Continuously wet areas need separate assessment. Andiwilson advises checking cleaning chemicals, edge protection and fixing method against current product data.

How should HPL boards be cleaned?

Routine cleaning with a soft cloth and neutral detergent is normally sufficient. Avoid abrasive pads, strong solvents and prolonged wet contact unless product guidance permits them. Andiwilson provides care notes for daily wiping and edge inspection, but cleaning chemicals should be checked against the selected board grade.

Jul

Quartz Fiber Board for Medical and Commercial Buildings: A New Generation of A-Class Fireproof Decorative Wall Panels

Jul

Prefabricated Modular Walls Take Another Leap Forward! Integrated Invisible Door Solutions Redefine the Boundaries of Spatial Aesthetics and Practicality

Sep

Why Do Architects Prefer Custom Textured Wall Panels for Museum and Gallery Spaces?

The Acoustic Problem That Decorative Finishes Alone Cannot Solve Walk into a gallery with hard floors, high ceilings, and bare drywall, and the space tells you something immediately. Footsteps carry. Conversations from three rooms away bleed throug...

Oct

A Complete Guide to Choosing the Right Exterior Wall Laminated Panels for Your Next Project.

Fire Classification Comes Before Aesthetics Specifying exterior wall laminated panels for a new project usually begins with a finish sample, a color, and a profile. That order is risky. A facade panel on a commercial building is part of a life safety...

Illustrative HPL Board Planning Notes

Claire Donovan

An illustrative airport lounge note described 12 mm HPL boards for a service counter and back counter. Cable ports and till recesses were cut from approved drawings, and boards were labelled by counter section for two night shifts. Staff agreed a neutral-detergent wipe routine and a method for reporting chipped edges. One spare board was stored for future changes. The note focused on cleanability, cable management and joint alignment, with performance checked against the chosen board grade.

Martin Keller

An illustrative commercial laundry note described 10 mm HPL boards for folding tables and sorting cabinet tops. A light grey decor helped show lint and spills for prompt cleaning. Boards were cut with sink recesses and edge trims at trolley impact points, then installed over a weekend. Staff received neutral-detergent guidance and were asked to avoid wet pooling at joints. Two spare boards were retained. The note addressed moisture exposure, edge protection and manageable replacement, with suitability confirmed against the selected grade and fixing detail.

Get a Free Quote

Our representative will contact you soon.

Mobile/WhatsApp

Name

Company Name

Message

0/1000

Board Thickness for Counters and Tables

HPL board thickness affects span, rigidity and edge appearance. Andiwilson reviews support conditions and expected loading before production. In an illustrative airport lounge, 12 mm boards suited a service counter with cable ports; a laundry project used 10 mm boards for folding tables. Thicker boards may suit longer spans or heavier use. The aim is a build-up matched to the fixing method and handling. Current technical data and approved drawings should be confirmed before ordering.

Cut-Outs for Cables, Sinks and Ventilation

Service openings affect both appearance and cleanability. Andiwilson discusses cut-out positions, radii and edge trims before fabrication. In an illustrative laundry project, sink recesses and trolley-impact trims were set out from drawings. In an airport counter, cable ports and till recesses were cut before edging. Clean cutting and suitable edge banding help boards keep their appearance. Fabricators should follow current tooling and adhesive guidance for the selected board, with details agreed before production.

Zone Labelling and Phased Board Delivery

Transport and utility projects often need boards delivered by zone without mixing similar decors. Andiwilson discusses labelling by counter section, changing room or floor and packing in the agreed sequence. In an illustrative sports centre, locker backs and dividers were packed by changing room for three-evening installation. Clear labels reduced sorting on site. Protective corners and flat stacking helped prevent transport marks. Packing and delivery details should be confirmed against the programme and current lead times.

Shanghai Xingjinxin International Trade Co., Ltd. | We specialize in decorative wall panels, flooring, mouldings, and interior decoration materials for residential and commercial projects. Combining reliable quality, innovative designs, and professional service, we provide customized solutions that help customers create durable, stylish, and functional interior spaces worldwide.

Our Products

Quick Links

GET IN TOUCH

Room 1316, Yongsheng Building, 2025 Zhongshan West Road, Xuhui District, Shanghai

Andy

+86-13564719782

[email protected]

Wilson

+86-18501635581